Home Decoration 6.3 Metres 0.4mm Ceiling Mount Drapery Rod

Curtain Finial Pole Hardware Precision Manufacturing Cast Iron Pipe Curtain Rod

Place of Origin: China

Thickness: 0.3mm,0.35mm,0.4mm,0.45mm

NET Weight: 1.5kg/6.7m/0.3mm

MOQ: 1000 sets

Price : US$0.44~0.6/m

Lead time : 7-15 days or negotiation

Installation of curtain rods

(1) Marking: Take the support under the installation curtain as the standard marking, and mark the positioning line and hole position line of the support. For three supports, the middle support is located in the window or wall, and the ends must be equidistant. The supports at both ends are about 15-20 cm away from the wall or 5-10 cm away from the end of the Roman rod.

(2) Punching: When the curtain rod is installed, the punching depth should be between 3.5cm and 5cm, of course, it can not run out of eyes and skew phenomenon; when drilling, you must pay attention to stay away from wires and water pipes, which punch When finished, press it into the hole.

(3) Mounting rod: The support is fastened by self-tapping; the ring is inserted into the rod, the ring is divided into two, and one ring is left at each end; the Roman rod is pressed into the open support and adjusted so that the two ends The distance between the decorative head and the wall is the same.

(4) Hanging the curtain: After the curtain is put on the hook, hang one end of the hook into the hole of the ring, but after hanging the curtain, the curtain should be opened and closed to check whether the sliding is flexible. The height of the curtain.